Bulk Equipment Operator ThermaSource
Summary: Responsible for driving, operating, and maintaining all bulk equipment. Assembles and prepares equipment for installation and service, performs pre and post equipment inspections and maintenance, assists the Cementing Equipment Operator, and contributes to safe rigging operations during and after service delivery.
Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty and responsibility listed below. Other essential duties and responsibilities may be assigned at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the listed essential functions and responsibilities.
Drive truck-mounted units and equipment to well sites.
Continually enhance knowledge and familiarity with field equipment and terminology, the correct use and care of personal protective equipment (PPE), Material Safety Data Sheets (MSDS), Hazmat, transporting dangerous goods such as fluids and chemicals (TDG), Emergency Response Plans, the location and use of all required safety equipment, fire fighting, and dealing with hydrogen sulfide (H2S) situations.
Maintain truck and bulk equipment to TCI standards, and ensure all equipment, including personal protective equipment is in proper working order.
Participate in and monitor execution of job/service; watch gauges, dials, or other indicators to make sure machine is working correctly.
Control operation of equipment or systems by using control mechanisms or by direct physical activity to operate machines or processes.
Determine causes of operating errors and assist supervisor is deciding what is needed to correct error/s.
Perform routine maintenance on bulk equipment.
Keep paper work current; maintenance sheets, fuel logs, log books, pre/post trips and month end expense accounts and job summary.
Communicate effectively with supervisor in planning and execution of TCI services.
Maintain TCI safety standards at all times; shop, yard, work site location and traveling.
Works with Bulk Plant supervisor and Inventory Specialist to keep an accurate inventory account.
Know and comply with mandated federal and state requirements effecting job.
Immediately report all accidents, incidents, injuries, hazards or potentially hazardous situations to supervisor.
Attend and participate in all safety and general meetings.
Experience and Skills:
To perform the job successfully, an individual should demonstrate the following competencies:
Design - Demonstrates attention to detail.
Problem Solving - Identifies and resolves problems in a timely manner: gathers and analyzes information skillfully: develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional issues.
Technical Skills - Assesses own strengths and weaknesses: pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others.
Customer Service (External and Internal) - Responds to requests for service and assistance; meets commitments.
Interpersonal Skills - Focuses on solving conflict, not blaming; maintains confidentiality: listens to others without interrupting: keeps emotions under control: remains open to the ideas of others and tries new approaches and concepts.
Oral Communication - Speaks clearly and persuasively in positive or negative situations: listens and gets clarification: responds well to questions: participates in meetings.
Written Communication - Writes clearly and informatively: edits work for spelling and grammar: presents numerical data effectively: able to read and interpret written information.
Leadership - Exhibits confidence in self and others; inspires and motivates others to perform well: effectively influences actions and opinions of others: accepts feedback from others: gives appropriate recognition to others: displays passion and optimism; inspires respect and trust; mobilizes others to fulfill the job at hand: provides guidance and inspiration to peers.
Change Management - Works openly with others in the implementation of plans: communicates effectively; builds commitment and overcomes resistance: positively supports change.
Delegation &ndash: Responds positively to delegated work assignments; meets the expectations required of delegated activities.
Quality Management &ndash: Continually looks for ways to improve and promote quality: demonstrates accuracy and thoroughness.
Business Acumen - Understands business implications of decisions: displays orientation to profitability and cost control.
Cost Consciousness - Works within approved financial constraints: develops and implements cost saving measures: contributes to profits and revenue: conserves organizational resources.
Diversity - Demonstrates knowledge of EEO policy: promotes a Zero Tolerance harassment-free environment; shows respect and sensitivity for cultural differences: educates others on the value of diversity.
Ethics - Treats people with respect: keeps commitments; inspires the trust of others; works with integrity and ethically; upholds organizational values: abides by written and spoken policy.
Organizational Support - Follows policies and procedures: completes administrative tasks correctly and on time; supports organization's goals and values; supports affirmative action and respects diversity.
Judgment - Displays willingness to make decisions: exhibits sound and accurate judgment; supports and explains reasoning for decisions; includes appropriate people in decision-making process; makes timely decisions.
Motivation - Sets and achieves challenging goals: demonstrates persistence and overcomes obstacles; measures self against World Class standard of excellence: takes calculated risks to accomplish goals.
Planning/Organizing - Prioritizes work activities; uses time efficiently; sets personal goals and objectives.
Professionalism - Approaches others in a tactful manner: reacts well under pressure: treats others with respect and consideration regardless of their status or position: accepts responsibility for own actions; follows through on commitments.
Quantity - Meets productivity standards: completes work in timely manner; strives to increase productivity; works quickly.
Safety and Security - Observes all safety and security procedures: promptly reports actual or potentially unsafe conditions or actions; uses equipment and materials properly and at all times when required.
Adaptability - Adapts to changes in the work environment: changes approach or method to best fit the situation: able to deal with frequent change, delays, or unexpected events.
Attendance/Punctuality - Is consistently at work and adheres to start and stop work times: ensures work responsibilities are covered when absent: arrives at work, meetings and appointments on time.
Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities: takes independent actions and calculated risks: looks for and takes advantage of opportunities: asks for and offers help when needed.
Innovation - Displays original thinking and creativity; meets challenges with resourcefulness: generates suggestions for improving work: develops creative approaches and ideas: presents ideas and information in a manner that gets the attention of others.
Supervisory Responsibilities: This position has no supervisory responsibilities.
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty and responsibility listed above in a satisfactory manner. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities.
Education and/or Experience: High School Diploma or GED or one or more years related experience and/or training in the operation of cement bulk equipment: or equivalent combination of education and experience in the oil/gas/geothermal field cementing industry.
Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Effectively write routine reports and correspondence. Ability to speak effectively before groups of customers or employees
Mathematical Skills: Ability to calculate figures and amounts such as proportions, percentages, area, circumference, pressure and volume; including pipe capacities and volume/height math, plug landing pressures and absolute volume. Concepts of basic algebra and geometry.
Reasoning Ability: to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills: Basic knowledge of computer helpful but not required.
Certificates, Licenses, Registrations: Class A Driver License with valid medical certificate: TSA certified. Certificate of achievement from an accredited oil well cementing institute is desirable but not required.
Other Skills and Abilities: Ability to speak Spanish helpful but not normally required.
Other Requirements: Incumbent must be open to extensive travel and working 12 to 24 hour &ldquo: On-Call status shifts with varying work schedules; for example, 15 days on, 6 days off.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel: reach with hands and arms and talk or hear. The employee is frequently required to walk: climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to stand and sit. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is occasionally exposed to fumes or airborne particles: toxic or caustic chemicals and vibration. The noise level in the work environment is usually moderate to very loud.
REASONABLE ACCOMODATION: It is the business philosophy and practice of ThermaSource, Inc. to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities.
This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.
Job Level: Any
Years of Experience: Up to 2 Years
Level of Education: High School/GED
Starting Date : ASAP