CNC Machinist Mark Andy, Inc.
THIS JOB HAS EXPIRED Mark Andy is seeking a CNC Machinist to program, operate and maintain CNC milling, lathe machines and other CNC equipment from setup to operation. If you are interested in this position, please email your resume and any other pertinent information to Mark Andy Human Resources.
Perform duties required to set up and operate CNC milling, lathe machines or other CNC equipment and inspect parts
Perform set up on cnc mill or lathe, such as: collect required tools, set stops, locate and indicate vises and fixtures, fabricate fixture if one is not available, "zero out" part and tools, install tools into carousel, input run data manually into machine and transfer data to a disk using a CMT or DNC unit or if program has already been made transfer data from disk to machine memory using the CMT or DNC unit, etc.
Using blueprints, program information, hand tools, etc.
Maintain file of program information and set up sheets, update revisions as required
Operate cnc mill or lathe: load material into fixtures or vises, clamp material down, machine material, such as: c'drill, drill, ream, tap, bore, mill, etc.
Inspect bored and reamed holes while running, make tool adjustments, unload parts and deburr
Edit program information as required Load additional pallets while parts on first pallet are being machined Inspect parts with hole and depth micrometers, plug and thread gauges, calipers, surface plate, height gages, etc.
Complete quality checks as required Hold tolerance per print
Collaborate with foreman and manufacturing engineers to verify and/or change shop routers to facilitate manufacture of parts
Assist engineering department by machining prototype parts and evaluate machinability of parts
Check and maintain oil levels, add coolant as needed, empty coolant drain pan, clean coolant filters, check chip conveyor operation, maintain area in a clean and orderly fashion, etc.
Use surface grinder to modify standard tools for specific parts and applications
Operate other machines, including CNC machines, as trained/required
Qualifications/ Skills Required:
Demonstrated ability to perform the tasks listed above
High School Degree or Equivalent
Minimum two years CNC lathe or milling experience or equivalent skills
||Chesterfield, MI |
THIS JOB HAS EXPIRED