Machinist - CNC Mill Operator (2nd Shift) Mark Andy, Inc.
THIS JOB HAS EXPIRED Mark Andy is seeking a CNC Mill Operator to perform duties required to set up and operate CNC milling machines and inspect parts. This position is for second shift. If interested, please send your resume and any pertinent information to Mark Andy Human Resources.
Duties include but are not limited to
Perform set up on CNC mill, such as: collect required tools, set stops, locate and indicate vises and fixtures, fabricate fixture if one is not available, "zero out" part and tools, install tools into carousel, input run data manually into machine and transfer data to a disk using a CMT or DNC unit or if program has already been made transfer data from disk to machine memory using the CMT or DNC unit, etc.
Using blueprints, program information, hand tools, etc.
Maintain file of program information and set up sheets, update revisions as required
Operate CNC mill: load material into fixtures or vises, clamp material down, machine material, such as: c'drill, drill, ream, tap, bore, mill, etc.
Inspect bored and reamed holes while running, make tool adjustments as needed, unload parts and deburr
Edit program information as required
Load additional pallets while parts on first pallet are being machined
Inspect parts with hole and depth micrometers, plug and thread gauges, calipers, surface plate, height gages, etc.
Complete quality checks as required
Hold tolerance per print
Collaborate with foreman and manufacturing engineers to verify and/or change shop routers to facilitate manufacture of parts
Assist engineering department by machining prototype parts and evaluate machinability of parts
Check and maintain oil levels, add coolant as needed, empty coolant drain pan, clean coolant filters, check chip conveyor operation, maintain area in a clean and orderly fashion, etc.
Use surface grinder to modify standard tools for specific parts and applications
Operate other machines, including CNC machines, as trained/required
Demonstrated ability to perform the tasks listed above
High School degree or equivalent
Minimum 2 years CNC milling experience or equivalent skills
Hold and depth micro-meters
Plug and thread gauges
Moderate to frequent exposure to shop environment; may be exposed to dust, odors, oils, fumes, chemicals, noise and moving parts. Work typically requires the usage of PPE and can require work on the facility?s production floor or on the production floor in a customer?s facility.
Regularly required to sit, stand, bend, reach, climb, stoop, kneel, crouch and crawl and move about facility and/or customer?s facilities. Frequent lifting up to 50 pounds.
||Chesterfield, MI |
THIS JOB HAS EXPIRED